Fallkniven A1 — 6.3 inch drop point blade in Laminated VG7

01234567 in

Fallkniven A1 · Drop Point
6.3″ blade · 0.24″ spine · 11.3 oz · ~1.56″ tall

Spine thickness, same scale

0.24″

Length and spine thickness drawn to true scale from published specs. Outline traced from the maker's side-profile photo.

Fallkniven

Fallkniven A1

Bushcraft & CampFixed Blade

The Fallkniven A1 is a 6.3" drop point fixed blade with a laminated VG7 core, convex ground. The handle is Kraton. Blade is 57% of its 11" overall length — unusually little handle for the reach it gives.

Blade: 6.3″
Weight: 11.3 oz
Steel: Laminated VG7
Price band: Premium

Best for

Batoning, carving and fire prep

We may earn a commission. Price and availability on Amazon’s site may differ.

Specifications

Manufacturer-published figures, cross-checked against knifeworks, bladehq.

Blade length: 6.3″
Spine thickness: 0.24″
Blade shape: Drop Point
Grind: Convex
Steel: Laminated VG7
Overall length: 11″
Weight: 11.3 oz
Lock: Fixed
Handle material: Kraton
Country of origin: Sweden

Why a drop point

The default hunting and EDC shape, and the safest general answer. The spine curves down to the tip in a convex line, which keeps the point low and strong and leaves plenty of belly for skinning. It is hard to make a drop point bad at anything.

Every drop point here →

About Laminated VG7

Fällkniven's current core steel, replacing VG-10 in the F1 and A1 from 2025. A Takefu stainless in the same class as VG-10, clad in softer stainless, run at 59 HRC with a convex edge.

Edge retention

2/5

Toughness

4/5

Corrosion resistance

4/5

Ease of sharpening

4/5

1-5 is a relative ranking drawn from published composition and hardness, not a lab measurement. Higher is better on every axis, and no steel is a 5 across the board — edge retention and toughness pull against each other. All Laminated VG7 knives

What owners say

Drawn from 39 owner discussions of the Fallkniven A1 since 2024. The opinions are theirs. The specifications above come from the maker.

What owners like

Owners with many fixed blades still pick it: one owner says that if they could take only one of their fixed blades into the woods it would be the A1, ahead of their Becker BK-7 and BK-9, and another names the A1 and a Mora Kansbol as the two bushcraft knives they use most out of a list that includes Bark River and Garberg.
Laminated VG-10 keeps maintenance low: a long-time Fallkniven fan says they originally went with the A1 for its corrosion resistance, because they admit they are lazy about keeping a knife treated and maintained.
It survives years of wood processing: one owner has had their A1 for about ten years and still batons with it, posting it dirty straight after a batoning session.
Camping confidence: one owner of both an A1 and a base-model Cold Steel SRK, answering a buyer choosing between them, says they would not hesitate to take their A1 on a camping trip and calls it a fantastic knife.
The convex grind and finish get credit even from skeptics: one knife user who calls Fallkniven overpriced still grants that the A1 comes convex ground with good fit and finish, and another points to the convex edge as the reason to prefer it over the SRK outdoors.

What owners flag

The handle can work loose with age: one owner's A1 handle became extremely loose with lots of wiggle after about ten years, and they went looking for someone in Canada to rehandle it.
One owner who went through both the S1 and A1 calls them one big disappointment, listing without separating the two knives blisters from a thin handle, a broken tip in the first month, a chipped edge, blade scratches from the sheath, and a blade-heavy feel, and they moved to a Cold Steel SRK in 3V.
Price puts buyers off: one shopper looking for a large camp knife dropped the A1 as too expensive, another noted it would cost more than the carving axe they were trying to avoid buying, and knife users call it a pricier option or an overpriced brand.
It can lose owners to rivals: a self-described long-time Fallkniven fan who bought an ESEE 5 says they already like it more than their A1 after comparing the two.

A 6.3 in blade, 0.24 in thick and 12 oz, makes the A1 the large survival and camp knife of the Fallkniven line, and owners bring it out for wood processing and as the single knife they would take into the woods. One owner still batons with theirs after about ten years, and another ranks it ahead of their Becker BK-7 and BK-9.

The laminated VG-10 blade is chosen for low maintenance: one long-time Fallkniven fan originally went with the A1 for its corrosion resistance because they did not want to keep treating a blade. The weak points owners report are the handle and the sheath. One ten-year A1 developed a badly loose handle, and an owner who went through the S1 and A1 lists blisters from a thin handle, a broken tip, edge chipping and sheath scratches before leaving Fallkniven for an SRK.

The Cold Steel SRK in 3V is the rival buyers weigh it against most, with the A1's full tang and convex grind set against the SRK's steel and lower price. The ESEE 5 and ESEE 6 are the other alternatives that come up, and price is the recurring objection, with two shoppers dropping the A1 as too expensive.

Should I buy the Fallkniven A1 or a Cold Steel SRK in 3V?

The buyer who asked liked the A1's full tang and the SRK's 3V steel and ended up leaning to the A1 after another knife user favored its convex edge for outdoor use, and an A1 owner calls it a fantastic camping knife. On the other side, one owner who went through the A1 and S1 switched to an SRK in 3V and prefers its handle and precision.

What can I do if the A1 handle gets loose?

One owner's handle became extremely loose after about ten years and they looked for someone to rehandle it rather than retire the knife. They were pointed to a Swedish maker in British Columbia who rehandles these knives.

Is the A1 worth the money for a big camp knife?

Opinion is split. One knife user calls it a pricier option for a big camp knife but a pretty bulletproof design, and one who thinks the brand is overpriced still credits the convex grind and fit and finish, while shoppers in two separate discussions ruled it out as too expensive.

Is the A1 a good batoning knife?

One owner still batons with theirs after about ten years, and another would take it over their Beckers as their only woods knife. A beginner who saw it recommended for batoning decided to stay with a Mora instead, because the A1 would cost more than the carving axe they were trying to avoid buying.