
- Condor Bushlore · Drop Point4.3″ blade · 0.12″ spine · 6.07 oz · ~1.26″ tall
Condor Bushlore
The Condor Bushlore is a 4.3" drop point fixed blade in 1075 Carbon, scandi ground. The handle is Walnut. Made in El Salvador, the only knife here from there.
- Blade
- 4.3″
- Weight
- 6.07 oz
- Steel
- 1075 Carbon
- Price band
- Mid
Batoning, carving and fire prep
We may earn a commission. Price and availability on Amazon’s site may differ.
Specifications
Manufacturer-published figures, cross-checked against knivesandtools, bladehq.
- Blade length
- 4.3″
- Spine thickness
- 0.12″
- Blade shape
- Drop Point
- Grind
- Scandi
- Steel
- 1075 Carbon
- Overall length
- 9.3″
- Weight
- 6.07 oz
- Lock
- Fixed
- Handle material
- Walnut
- Country of origin
- El Salvador
Why a drop point
The default hunting and EDC shape, and the safest general answer. The spine curves down to the tip in a convex line, which keeps the point low and strong and leaves plenty of belly for skinning. It is hard to make a drop point bad at anything.
Every drop point here →About 1075 Carbon
Lower carbon than 1095, so softer and even tougher. Common on machetes and budget bushcraft blades.
1-5 is a relative ranking drawn from published composition and hardness, not a lab measurement. Higher is better on every axis, and no steel is a 5 across the board — edge retention and toughness pull against each other. All 1075 Carbon knives
What owners say
Drawn from 38 owner discussions of the Condor Bushlore since 2024. The opinions are theirs. The specifications above come from the maker.
What owners like
- Tough for the money: one owner calls theirs the perfect size for most jobs, incredibly tough and inexpensive.
- Proven at wood processing. An owner shopping for a replacement says the Bushlore has done really well for them at wood processing and general tasks, and calls it well loved.
- The scandi grind earns its keep: the same owner says the Scandi grind has been nice with no complaints.
- Takes a custom handle: one owner built a new handle for theirs as their first handle project and likes the result.
What owners flag
- Edges can arrive dull. One new buyer received a Bushlore as dull as a butter knife and struggled to sharpen it on a Work Sharp field sharpener.
- 1075 carbon steel needs looking after. One owner found drying and oiling it after use cumbersome enough to consider stainless, and another asked whether marks on the edge of a newish one after a single camp trip were rust.
- The spine would not throw sparks from a ferro rod for one owner, who asked why.
- The stock sheath carries it vertically only, and one first-time owner went looking for a canted aftermarket sheath.
- A bit big for daily carry, in the view of one knife user who prefers the Mini Bushlore for that.
A 4.3 inch scandi-ground 1075 blade on walnut for a budget price, the Bushlore is bought as a first bushcraft or camp knife. One owner calls it the perfect size and incredibly tough for the money, and another says it has handled their wood processing and general tasks well.
Carbon steel care comes up: one owner found the drying and oiling tedious, and another asked whether marks on the edge after one trip were rust. One new buyer's knife arrived very dull, and another could not get sparks from a ferro rod with the spine.
Mora Companion and Garberg, ESEE and Joker are the knives it sits beside. One owner keeps a Mora Companion as the beater next to it, and another ready to move on from theirs looked at the ESEE RB3 and Joker Bushcrafter before choosing a Bradford.
How do I keep the 1075 blade from rusting?
Dry it fully after use and oil the edge. One knife user wipes a drop of household 3-in-1 oil on the edge after every use and carries an eyedropper of it outdoors, and a Bushlore owner says that is exactly how they maintain theirs.
Can I get a different sheath for the Bushlore?
One first-time owner who wanted canted carry instead of the vertical stock sheath was told Condor's Aqua Lore comes with a Kydex sheath that might fit (though not for certain), that searching for Bushlore Kydex sheaths turns up many options, and to try Patriot Leather.
What do owners upgrade to from the Bushlore?
One owner who loved theirs weighed an ESEE RB3 against a Joker Bushcrafter, was told neither was a big step up, and bought a Bradford Guardian 3.5 XL on sale instead.
Features
- Full fixed tang
- Scandi grind
- Made in El Salvador
- Carbon steel blade — will patina

