Outdoor Edge RazorLite EDC — 3.5 inch drop point blade in 420J2

01234567 in

Outdoor Edge RazorLite EDC · Drop Point
3.5″ blade · 0.024″ spine · 2.8 oz · ~0.91″ tall

Spine thickness, same scale

0.024″

Length and spine thickness drawn to true scale from published specs. Outline traced from the maker's side-profile photo.

Outdoor Edge

Outdoor Edge RazorLite EDC

Replaceable-BladeFoldingReplaceable blade

The Outdoor Edge RazorLite EDC is a 3.5" drop point folder in 420J2. It runs RazorSafe 350 replaceable blades and ships with 6 spares — the edge is swapped rather than sharpened. The handle is GRN + TPR, secured by a back lock. At 2.8 oz it sits 7th-lightest of the 12 replaceable-blade knives here, where the median is 2.8 oz.

Blade: 3.5″
Weight: 2.8 oz
Steel: 420J2
Price band: Budget

Best for

Field dressing and skinning without stopping to sharpen

We may earn a commission. Price and availability on Amazon’s site may differ.

Specifications

Manufacturer-published figures, cross-checked against outdooredge.com.

Blade length: 3.5″
Spine thickness: 0.024″
Blade shape: Drop Point
Steel: 420J2
Overall length: 8″
Weight: 2.8 oz
Lock: Back Lock
Deployment: Manual
Handle material: GRN + TPR
Replacement blade: RazorSafe 350 · 6 included

Why a drop point

The default hunting and EDC shape, and the safest general answer. The spine curves down to the tip in a convex line, which keeps the point low and strong and leaves plenty of belly for skinning. It is hard to make a drop point bad at anything.

Every drop point here →

About 420J2

Soft and very rust-resistant. Used almost exclusively for replaceable blades, where it is thrown away rather than sharpened.

Edge retention

1/5

Toughness

3/5

Corrosion resistance

4/5

Ease of sharpening

5/5

1-5 is a relative ranking drawn from published composition and hardness, not a lab measurement. Higher is better on every axis, and no steel is a 5 across the board — edge retention and toughness pull against each other. All 420J2 knives

What owners say

Drawn from 8 owner discussions of the Outdoor Edge RazorLite EDC since 2024. The opinions are theirs. The specifications above come from the maker.

What owners like

One elk hunter gets roughly one blade per animal: they gut and cut knuckles with an old blade, then skins and quarters with a fresh one, at under $2 a blade.
The blade release has never let go by accident for one elk hunter, who also says it always works when they do want a blade out.
One owner's came with 6 blades in total, and they note that other blade styles are sold for it.
Out of the box it is very sharp, enough that one owner who uses it as their box cutter, bought for about $20, has the bandage to show for it.
Large hands fit it well according to one owner with big hands, and an elk hunter who paid $23 for their last one with a couple of blades hands them out to new hunters.

What owners flag

The groove the blade slots into gets gunky and needs focused cleaning, the one complaint of an elk hunter who otherwise rates it.
Twisting or prying loads are a weak point: the same hunter says it does not tolerate much twist or torque.
One owner's blades stopped locking into place, which they put down to oil fouling the latch, and they had to ask whether it could be taken apart safely.
Corrosion ended one owner's knife: used for cutting hoses and tubing in landscaping, it got grimy, rusted quickly and was thrown out.

Box cutting, landscaping and elk camp are the three jobs owners describe it doing. The 3.5 in 420J2 blade is a RazorSafe 350 cartridge rather than a fixed edge, so owners treat the edge as a consumable: one elk hunter budgets about a blade per animal at under $2 each, and a box-cutting owner bought theirs for around $20.

A blade release that one hunter says never let go by accident sits beside the knife's real chores: the same hunter says the groove the blade slots into gets gunky and needs focused cleaning, and that it does not tolerate much twist or torque. One owner's blades stopped latching, which they suspected was oil in the mechanism, and another owner who used it for hoses and rubber tubing in landscaping watched it rust and threw it out.

Twenty-three dollars bought one elk hunter their last one with a couple of blades, and they hand them out to new hunters. A big-handed owner says the RazorLite fits them well, and pointed a small-handed buyer toward a slimmer scalpel-style processing tool instead.

How many RazorLite blades does an elk take?

One elk hunter uses about one blade per elk: an older blade for gutting and cutting through knuckles, then a fresh one for skinning and quartering. They put the blade cost at under $2.

Does the RazorLite blade ever release by accident?

Not for one elk hunter, who says the release always works and has never let a blade go unintentionally. Another owner reports the opposite problem: the blades on their EDC stopped locking into place, which they suspected was oil in the latch.

What blades come with the RazorLite EDC?

One owner's came with 6 blades in total. They add that other blade styles are available for it.